Self-Centering ActionAvailable in Several Beautiful Finishes 3 Year WarrantyWall MountThe variety of styles and finishes in our Concord Series allows the installer/designer to create custom shower enclosures limited only by their imagination. These beautifully finished, solid brass forged Concord Hinges make it possible to mount 3/8" (10 mm) to 1/2" (12 mm) thick tempered safety glass shower doors without surrounding frames, so the door has an almost "floating" appearance. Their heavy-duty stainless steel springs allow the door to swing 90º in and 90º out. A friction cam allows the door to be firmly maintained in any position, except when within 15º of the closed position, where they are tapered to assist in centering the door.Using two hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width for 3/8" glass of 28" (711 mm) and maximum door width for 1/2" of 26" (660 mm).Using three hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width for 3/8" glass of 34" (864 mm) and maximum door width for 1/2" of 30" (762 mm).SPECIFICATIONS:Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety GlassSpecial Features: Our original hinge offers years of reliability and elegance.Construction: Solid BrassHinge Swings: 90º In and 90º OutClosing Type: Self-Centering when within 15º of closed position.Cut-Out RequiredIncludes: Gaskets, Screws, and Glass Fabrication DimensionsCustom finishes are available on request. Contact the DK Hardware Sales Shower Door Department.Important NotesNOTE: All C.R. Laurence Hinges in this catalog are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the C.R. Laurence Technical Sales Department.NOTE: Use only the template included with our hinge. Cut-out dimensions for CRL hinges may not match those of other brands.